PIBTERM is another terminal that will work with CONDOR.SYS
and the version I tested it on is from 1987!  Gee see
how hard it would be for those big gun terms to support 
CONDOR?!  Give me a break!

PIBTERM can be downloaded from The UNKNOWN SYSTEM 205-534-8532 v.32bis



How to get CONDOR.SYS to work with PIBTERM:


1.  Install CONDOR.SYS  put a line like 
    device=condor.sys
    in your config.sys file and delete any other
    line in the config.sys that loads any other 
    ansi.sys then reboot. 

2.  Configure PIBTERM to 8 data bits, NO parity,
    and 1 stop bit.

3.  From PIBTERM type ALT-P select terminal emulation
    then set terminal type to DUMB, in that same menu set
    also option 'm' DOS console output to YES.
    Hit esc and select WRITE settings to disk.  
    You might want to rerun PIBTERM to make sure the
    settings load in. 

4.  Doesn't work?  Just double check the settings and make sure
    they are what I said.  I tried this with PIBTERM402.
    It may have some minor problems because of the screen
    mode switching,  I'm hoping it won't be to bad,
    I only tested Condor with PIBTerm for a short while.
    If you don't like PIBTerm you might want to try 
    COM-AND or BIG103, RCOMM and IL  tsr terms work with CONDOR too.
