

Break Timer
Version 1.4

by Vernon J. Adams


Copyright (c) 1992, Adams Software Development & Training, Inc.

Windows is a registered trademark of Microsoft Corporation



CONTENTS

INTRODUCTION
Chapter 1 : Introduction to Break Timer
1.1 What is Break Timer?
1.2 What Break Timer is not.

INSTALLATION
Chapter 2 : Installing Break Timer
2.1 Hardware and software you will need
2.2 Break Timer files checklist
2.3 Installing Break Timer
2.4 Autostart Break Timer

OPERATION
Chapter 3 : Operation
3.1 Responding to the alarm
3.2 Changing the time period
3.3 Disabling the alarm

REGISTRATION
Chapter 4 : Registration and Licensing
4.1 Registration
4.2 Registration Form



INTRODUCTION

Chapter 1
Introduction to Break Timer

1.1 What is Break Timer?

Break Timer is a MS-Windows program which sets off an alarm at a pre-defined interval.
Break Timer was written as a program to remind people who work at their workstations
for long periods of time to stop and take a break.

In recent years with the popularity of personal computers in the business there has been
an increase in the number of repetitive stress injuries occurring from continuous use of
the keyboard and mouse.  One aspect of avoiding such injuries is to periodically take a
break from working, however people often get involved in working and forget to take
breaks.  Break Timer is a program which reminds one to take a break.


1.2 What Break Timer is not.

Break Timer is not a general purpose alarm program.  It is not designed to remind you of
your next meeting or your doctor's appointment.  There are plenty of fine programs
around which will do that for you.  Break Timer is an interval timer.  It starts a countdown
for a period of time.  At the end of that period of time, it notifies you to take a break.
Once OK is selected, it starts the countdown again.  Alarm programs do not work well
for repeating the same period alarm continuously.  Likewise Break Timer does not work
well for setting alarms at different times.



INSTALLATION

CHAPTER 2
Installing Break Timer

2.1 Hardware and Software That You Will Need

Almanac requires an IBM Personal Computer or compatible, equipped with the
Microsoft Windows operating environment, level 3.0 or higher.   The installation will
require approximately 600K bytes of file space on your hard disk.


2.2 Break Timer Files Checklist

The following files make up the Break Timer package.

timr.wri 	The manual (this document).
timr.txt		A text version of this document.
timr.exe 	The program.
timr.hlp	 	The help file for the program.


2.3  Installing Break Timer

Place the above three files in a directory.

From Program Manager, choose a group in which to place Break Timer.

Pick File/New, specifying a Program Item.

In the Command Line entry type the full path and filename for timr.exe.

Fill in description as you wish.

Most people like to Check the Run Minimized option.

Click on OK.  The Break Timer icon should now appear in the selected group.



To run Break Timer, double click on its icon.


2.4 Autostart Break Timer

In order to autostart Break Timer, place it in the Startup Group of Program Manager.



Chapter 3
Operation

3.1 Responding to the alarm

When the timer period has expired Break Timer will present an alarm dialog box.  There
are two buttons on the dialog box.  The left button is labeled "OK"; pressing this button
will cause the dialog box to disappear and the timer will begin timing for the specified
period of time again.  The right button is labeled "Snooze".  This button is similar to the
snooze button on alarm clocks.  Pressing the Snooze button will cause the dialog box to
disappear, but it will reappear in five minutes.  This feature is useful when you are
engaged in something that cannot be interrupted.  Pressing this button gives you a time
to find a stopping place in your work before taking a break.




3.2 Changing & Saving the time period

Choosing Change Time Period from the File menu presents a dialog box in which the
user can specify the number of minutes between alarms.  Changing the current time
period does not change the value that the program loads upon startup.  In order to
change the permanent time period use the Save Time Period menu option.





Choosing Save Time Period Value from the File menu saves the current time period for
loading each time the program starts.

3.3 Disabling the Alarm

Choosing Disable Alarm from the File menu turns the alarm off without stopping the
Break Timer program.  This option is useful when your a running a long program while
the computer is unattended.  This option will prevent the alarm from going off.


REGISTRATION

CHAPTER 4
Registration and Licensing

4.1 Break Timer Registration

With registration you will receive a license number which will prevent the shareware screen from
soliciting you to register your software. This registration will be good for all future shareware versions
of Break Timer.  The registration does not include update disks, a manual, or any other service.


4.2 Registration Form	(Printed on following page)


License request for Break Timer for Windows
Copyright (c) 1992-1993 by Adams Software Development & Training, Inc.


Break Timer is licensed on a per user basis.  The license grants the user the right to install
and use the software on one or more computers so long as the total number of users does not
exceed the license quantity.


_______________________________________	
Name

_______________________________________
Street

________________________________________
City          	State/Prov     	ZIP

_______________________________________
Country		Phone


				Qty		Price	Total

Registration                		____	x 	$15.00	______

							______	Georgia residents
								add 5% sales tax.
					Total:		_______



       Mail check or money order to:

                             Adams Software Development & Training, Inc.
                             5927 Western Hills Dr.
                             Norcross, GA  30071

    Thank you for supporting the shareware software concept and encouraging the future development of other
software products for  Windows!


Adams Software Development & Training, Inc.
Norcross, GA  30071

Telephone: (404)448-3781

Specializing in Windows based client/server development and training.


